Debug and Application of the EPS Shape Moulding Machine

EPS shape moulding machine as the name suggests is specialized in the manufacture of foam products molding machinery.

And the shape of the good or bad is related to the overall quality of foam products, so in order to ensure the normal work of the EPS shape moulding machine, it is necessary to often adjust the machine as follows:

The working principle of the EPS shape moulding machine is similar to the syringe used for injection. It is the process of injecting plasticized molten plastic into the closed mold cavity with the help of screw thrust and obtaining the product after curing and finalizing.

Usage of foam forming machine

1. Choose a flat table, put the machine stable, can be the EPS shape moulding machine molding machine feet open to make the machine panel easy to observe the handheld sensor head plug into the panel socket and tighten.

2. Position the gap and insert one end of the power cord into the socket on the back board of the case and the other end into the power supply socket. Be sure to use single-phase three-wire power generation to open the “power main switch” on the back board of the EPS foam moulding machine.

3. The EPS foam molding machine can be installed and used separately, but the mold needs to be installed manually, and the mold can be unloaded.and the automatic loading rack or other auxiliary equipment can be configured.

The EPS shape moulding machine has the advantages of easy operation, easy maintenance, easy maintenance and mechanical debugging, mold replacement and so on.

Share this article!