EPP Machine For Car Parts

EPP Machine For Car Parts Main advantage

EPP Machine

Save Energy Consumption

1.The EPP Moulding Machine Same as KURTZ machine can equip with condenser and separated vacuum pump for single machine as an auxiliary if customer don’t have Central vacuum system, to accelerate product shaping speed, shorter the cooling time & reduce product water content. Through vacuum cooling, the mold chamber temperature can keep a high temperature when demoulding, to reduce steam consumption and short heating time for next cycle.

2.Steam system usually equip with full digital proportional control valve (SMC) with black controller and angle seat valve(GEMU), can automatically adjust the degree of valve open/close by signal, to save energy consumptions, also have a precise control of production energy consumption.

3.Two valves of two branches on main steam pipe to save steam consumption: when penetration (fixed steam—move steam—both steam), open two valves together; when moulding, only open small valve as there is no need such a big steam pressure and capacity.

4.The EPP Machine Using bigger diameter valve of steam system can offer enough capacity in an instant, to short the cycle time.

5.Mutil-points steam heating, to achieve the steam more evenly distributes in the steam chamber.

High Quality Mechanical Frame

1.The EPP Machine Uses the ways of combined rotary assembly type, which reduce the hose using, to reduce more cost in the future.

2.Use the ways of high frequency combined solenoid valve (SMC) and digital proportional valve with Pressure sensor to control the steam through two set of pipes, which ensure the Efficiency and stability of equipment steam, and also reduce steam loss at the same time.

EPP Machine For Car Parts Parameter:

Item Unit K1012P K1315P K1522P
Steam chamber mm 1000×1200 1300×1500 1500×2200
Max molding area mm 700X1200 1200×1400 1400×2100
Max thickness product mm 400 400 400
Max stroke distance mm 1250 1250 1250
Max steam pressure bar 8 8 8
Mould-locking pressure KN 645 1035 1600
filling injector/gun interface 2X16  G1 2X25  G1 2X25  G1
Inlet of raw material inch R2’’/DN50 R2’’/DN50 R2’’/DN50
Steam inlet inch R4’’/DN100 R4’’/DN100 R5’’/DN125
Air inlet inch R2’’/DN50& R1-1/2’’/DN40 R2’-1/2/DN50& R1-1/2’’/DN40 R2’’-1/2/DN65& R1-1/2’’/DN40
Cooling water inlet inch R2-1/2’’/DN65 R2-1/2’’/DN65 R2-1/2’’/DN65
Main drainage outlet inch R6’’/DN150 R6’’/DN150 R6’’/DN150
Drainage outlet of condenser inch R3’’/DN80 R3’’/DN80 R3’’/DN80
Control screen 10inch Siemens TOUCH SCREEN 10inch Siemens TOUCH SCREEN 10inch Siemens TOUCH SCREEN
hydraulic motor kw 5.5kw-50Hz 7.5kw-50Hz 7.5kw-50Hz
Vacuum pump kw 5.5kw-50Hz 5.5kw-50Hz 5.5kw-50Hz
Suction material fan kw 1.5kw-50Hz 1.5kw-50Hz 1.5kw-50Hz
Outside dimension mm 5200X2800X4300 5300x3000x4920 5300x3800x5300
Equipment N.W kg About 9500 About 11300 About 14000

The Machine Application:

EPP Machine Application

Contact Us