New Automatic Energy-Saving EPS Block Machine

EPS Energy-saving Block Molding Machine
EPS Energy-saving Block Molding Machine

New Fully Automatic Energy-Saving EPS Block Machine:

eps block moulding machine-01
eps block moulding machine_02
eps block moulding machine_05
eps block moulding machine customer factory

The EPS Block Machine is made by welded high-strength rectangular tubes and steel plates, processed with aging heat treatment to enable the machine has high strength;

All the mechanical modules are annealed and milled by gantry milling to remove internal stress which protect the machine from deformation and withstand the expansion forces from high-density products;

Adopts reed switch electric contact pressure gauge and external safety valve to double protect the equipment. Hydraulic pressure and steam test could ensure the machine work stably.

Compared with normal type equipment , The EPS block machine type machine can save 20~30% steam energy and greatly reducing the cooling time by using single-channel cross penetration heating and cooling . The outer frame uses rockwool to reduce the steam condensation rate , and reduce the moisture content of the finished product .

Adopts Schneider PLC and touch screen to achieve full computer control and full automation cycle operation include the mold opening and closing, feeding, heating, insulation, vacuum cooling, demould and eject the finished product.

Adopts special and advantage through-heating moulding technology, it is equipped high pressure induced draft fan and suction and cooling, with strong penetration, low steam consumption, fast molding performance, to ensure consistent inside outside the product with good adhesion and low moisture.

The EPS Block Machine Parameter:

Item Unit PSB-Q600
Net Internal Size of Mould Chamber mm 6120*1250*630
Volume of Mould Chamber 4.8
Product Density/Specific Weight kg/m³ 4-30
Production Effciency(Standard Condition) piece/h 4-22
Steam Pressure Mpa 0.6-0.8
Compressed Air Inlet Diameter mm 50
Steam Inlet Diameter mm 150
Power Supply V 380
Power kw 17
Max.External Dimension mm 7500X2150X2950
Installed Weight kg 10,000

EPS Block Machine Application:

eps block moulding machine application

Leave a message